Determining The Location of Regional Landfill in Kediri District Using Spatial Approach with Geographic Information System Applications
DOI:
https://doi.org/10.59888/ajosh.v1i11.92Keywords:
Inhibiting Factors, Spatial, Geographic Information System, Final Waste Processing SiteAbstract
Existing landfills in Kediri Regency and City are experiencing overcapacity conditions which are influenced by the increasing volume of waste along with the increasing population and the rapid development of urban areas. The Regional Landfill in Kediri Regency which is a national project based on Presidential Regulation of the Republic of Indonesia Number 80 of 2019 concerning the Acceleration of Economic Development in the Gresik - Bangkalan - Mojokerto - Surabaya - Sidoarjo - Lamongan, Bromo - Tengger - Semeru, and Selingkar Wilis - Lintas Selatan areas and is part of the Kediri Regency Regional Spatial Plan needs to be analyzed for location feasibility. The feasibility of the location of the Regional Landfill is the goal of this research with a spatial approach using Geographic Information Systems by considering the parameters in SNI 03-3241-1994 concerning Procedures for Selecting the Location of Waste Landfills. The selected variables are constraining factors consisting of regional criteria, namely geological conditions, hydrogeological conditions, slope, protected areas, distance to airfields, flood susceptibility and distance to water bodies. The feasible locations for regional landfill based on spatial analysis using GIS are in Ngadiluwih, Kras, Purwoasri, and Mojo sub-districts.
References
Birawida, A. B., Makkau, B. A., & Dwinata, I. (2018). Penentuan Lokasi Tpa Dengan Pendekatan Spasial Di Pulau Kecil Kota Makassar. Media Kesehatan Masyarakat Indonesia Universitas Hasanuddin, 14(3), 278–284.
Irawan, A. B., & Yudono, A. R. A. (2014). Studi Kelayakan Penentuan Tempat Pemrosesan Akhir Sampah (Tpa) Di Pulau Bintan Propinsi Kepulauan Riau. Jurnal Ilmu Lingkungan, 12(1), 1–11.
Kosakoy, M. N. M., Wallah, S. E., & Riogilang, H. (2022). Analisis Pemilihan Lokasi Tempat Pemrosesan Akhir Sampah Berbasis Sistem Informasi Geografis (Sig) Di Kabupaten Minahasa Tenggara. Paduraksa: Jurnal Teknik Sipil Universitas Warmadewa, 11(1), 57–72.
Mizwar, A. (2012). Penentuan Lokasi Tempat Pengolahan Akhir (Tpa) Sampah Kota Banjarbaru Menggunakan Sistem Informasi Geografis (Sig). Enviroscienteae, 8(1), 16–22.
Mulyono, A., Lestiana, H., & Fadilah, A. (2019). Permeabilitas Tanah Berbagai Tipe Penggunaan Lahan Di Tanah Aluvial Pesisir Das Cimanuk, Indramayu. Jurnal Ilmu Lingkungan, 17(1), 1–6.
Yedidia, D. (2016). Penentuan Alternatif Lokasi Tempat Pembuangan Akhir (Tpa) Sampah Di Kabupaten Sidoarjo. Jurnal Tehnik Its, 8(2).
Yustikarini, R., Setyono, P., & Wiryanto, W. (2017). Evaluasi Dan Kajian Penanganan Sampah Dalam Mengurangi Beban Tempat Pemrosesan Akhir Sampah Di Tpa Milangasri Kabupaten Magetan. Proceeding Biology Education Conference: Biology, Science, Enviromental, And Learning, 14(1), 177–185.
Badan Standarisasi Nasional. (1994). SNI 19-3241:1994 tentang Tata Cara Pemlihan Lokasi Tempat Pembuangan Akhir Sampah. Badan Standardisasi Nasional
Anonim. (2008). Undang-Undang Republik Indonesia Nomor 18 Tahun 2008 tentang Pengelolaan Sampah. Lembaran Negara Republik Indonesia.
Anonim. (2012). Peraturan Pemerintah (PP) Nomor 81 Tahun 2012 tentang Pengelolaan Sampah Rumah Tangga Dan Sampah Sejenis Sampah Rumah Tangga. Pemerintah Republik Indonesia.
Anonim. (2012). Peraturan Daerah Provinsi Jawa Timur Nomor 5 Tahun 2012 Tentang Rencana Tata Ruang Wilayah Provinsi Tahun 2011 - 2031. Pemerintah Daerah Provinsi Jawa Timur.
Anonim. (2013). Peraturan Menteri Pekerjaan Umum dan Perumahan Rakyat Nomor 03/PRT/M/2013 tentang Penyelenggaraan Prasarana dan Sarana Persampahan dalam Penanganan Sampah Rumah Tangga dan Sampah Sejenis Sampah Rumah Tangga. Kementerian Pekerjaan Umum dan Perumahan Rakyat.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Agnes Tyagita Ayudyaningtyas, Harsuko Riniwati, Agung Murti Nugroho
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
