Analysis of The Effect of Fuel Switching on The Thermal Efficiency of PLTG Unit 1.3 PT. PLN Indonesia Power Priok PGU
DOI:
https://doi.org/10.59888/ajosh.v2i5.242Keywords:
gas turbine;, LNG;, HSD;, load:, efficiencyAbstract
This study discusses the topic of thermal efficiency analysis in gas turbines. This study aims to determine the effect of using LNG and HSD fuel on the value of thermal efficiency. Therefore, the actual brayton cycle calculation method is used. This research is doing data processing using software, namely Microsoft Excel, Engineering Equation Solver (EES) and Cycle Tempo. Based on the results of the calculations that have been carried out, the thermal efficiency at a load of 75 MW with LNG fuel is 37.96% to 44.62% at a load of 100 MW and with HSD fuel at a load of 75 MW it is 40.61% and 45.60% at a load of 100 MW. Then in the EES simulation results with LNG fuel at a load of 75 MW it is obtained 37.51%, and 41.96% at a load of 100 MW. whereas with HSD fuel at a load of 75 MW it was obtained 41.76% and 46.15% at a load of 100 MW, and also the results of the cycle tempo simulation with LNG fuel at a load of 75 MW were 32.56% to 37.43% at a load 100MW. Then with HSD fuel at a load of 75 MW it is 34.47% to 38.14% at a load of 100 MW
Published
Issue
Section
License
Copyright (c) 2024 Muhammad Ridwan, Rachmat Adi Gumelar
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International. that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.